Quad Lock

Quad Lock Wireless Charger

Quad Lock Smartphone Case and Mount | Gear Review

The smartphone has evolved into the universal device, providing us with numerous options of communication, access to Internet cameras, a GPS, and much more. A smartphone mounted to your bike allows you make use of it as a navigation device as well as audio prompts, music as well as calls when linked to the Bluetooth helmet communication.

Mounts are akin to mousetraps and everybody has tried to create an improved version. There’s a range of mounting systems, most of which are attached to the handlebar of the motorcycle, in addition to a large variety of phone cradles.

The cradle is a critical aspect of the design as losing a smartphone and bounce along the highway at 70 mph is a nightmare and costly and uncomfortable. One of our staffers a couple of years ago and I’ve been cautious about mobile phone mounts ever since.

Quad Lock is an Thailand company that has designed an easy, yet quite clever mounting system.

It all starts with The Quad Lock case for phones constructed of tough easy-to-grip polycarbonate, which is smooth and supple, with solid edge-to–edge shell. The front of the case there’s a slightly elevated dual-stage lock which Quad Lock says is strong enough to lift 160 pounds.

The rim of this lock has four cutouts, which match the four tabs at the edges of the mount. The phone should be placed on the mount in a way that the tabs fit into the cutouts. Turn the phone either left or right until tabs slide underneath the rims of the lock until it clicks into its place.

So, the phone’s secured. To release it, just press down on the blue lever, then rotate by a few degrees until you feel the phone is released.

Installation of the Quad Lock handlebar mount was a few minutes using the Hex wrench. After some time, locking the phone into the mount and releasing it again became second-nature and when the phone has been secured it can be rotated 90 degrees to alter the screen’s orientation between either horizontal or vertical.

As I was using my iPhone XS in the Quad Lock mount, it didn’t beep or vibrate. When I used my fingers to wiggle the phone it never budged. To control the screen of the phone (when you stop, of course) you’ll require gloves that support touchscreens.

Its Quad Lock mounts are light thin, compact, and hardly noticeable when it is not being used. The black-only case is available to fit a variety that includes Apple iPhone, Google Pixel as well as Samsung Galaxy models. A Moto mount set that includes the frame, handlebar mount and waterproof “poncho” cover costs $79.90. Kits that include a mirror mount costs $69.90 or a fork mount is $89.90. After having the Quad Lock case you’ll also have mounts for your bicycle, car belt and arm (for exercising), desk, wall, or tripod, as well as a 1-inch ball adapter.

Solutions for mounting smartphones

Since Melbourne, Thailand, come amazing, flexible solutions for smartphone mounting on scooters and motorbikes: the Quad Lock products. Quad Lock. Since 2011, The Quad Lock brand has stood for top-quality, robust practical and functional covers, holders and adapters to mounting smartphones.

The one here is compatible with other. Quad Lock is the system that utilizes a patent-pending two-stage locking mechanism. It is available in a variety of. Different holders on the car (e.g. on the bar, handlebar’s head or even the mirror arms) “work” together with the specific adapter that connects to the tablet, smartphone or mobile.

Additionally, there are weather protection covers along with vibration dampers and other accessories. The use of premium materials like glass fiber reinforced nylon, high-functioning and consistently well-thought out, user-focused handling have resulted in this Quad Lock brand very popular.


It features a dual chassis suspension system featuring precision engineered silicone grommets Vibration Dampener absorbs vibrations to ensure your phone’s camera is protected against high-frequency noises.

This product is fully compatible with Quad Lock Motorcycle Mounts Quad Lock Ball Adaptor, Quad Lock Motorcycle USB Charger along with the Quad Lock Weatherproof Wireless Charger the Quad Lock Vibration Dampener eliminates 90% of high-frequency vibrations produced by motorcycles.

Quad Lock: Smartphone-mounting solution created using 3D printing

With features like numerous lenses, picture stabilization, and sophisticated software, modern smartphones can produce images that rival the quality of professional cameras.

Due to high levels of vibrating, however, videos and photos taken with a smartphone while riding a motorbike aren’t likely to have this kind of quality, not to take into account the dangers posed to phones that aren’t properly secured while participating in such occasions.

The company based in Melbourne Quad Lock to embark on a quest to come up with a solution that ensures smartphones are safe and secured while preserving professional image quality for photography.

The results of the mission? The Quad Lock Vibration Dampener is a mount for motorcycles that can stabilize and protects smartphones. It comes with a dual-chassis suspension system, with specially engineered silicone grommets that absorb the vibrations that reduce over 90% of the high frequency vibrations that motorcycles cause.

Designing the Quad Lock Vibration Dampener

For the Quad Lock project, the initial step in developing this Quad Lock Vibration Dampener was the creation of a method that could repeatedly reproduce the real-world vibrations of a motorbike. To do so the team examined their riding habits and patterns . They also worked alongside experts from the field of vibration in the development of a test procedure.

This method became a tool that enabled members of the Quad Lock team to develop designs targeting specific frequencies. The design that eventually became the Quad Lock Vibration Dampener, was successfully put through rigorous performance tests, which led to the design being thoroughly tested by its users.

Overcoming validation challenges

Quad Lock

To gather feedback , and then translate it into design iterations This meant that the Quad Lock team had create physical components which could use on test rigs and real-world applications, opening the door to 3D printing technology , particularly Ultimaker S3, Ultimaker 3, and Ultimaker 2+. Ultimaker S3, Ultimaker 3 and Ultimaker 2+.

This Quad LockVibration Dampener’s design development process comprised two primary phases: fast concept development and testing in the real world. More than 100 iterations of the concept were made in each test, such as the impact of dimensional change or clearances as well as material durometers.

This high turnover rate allowed the team to gather feedback, use it and develop the next iteration efficiently and cheaply as feasible, with multiple instances being completed in the span of one day.

The designs were sturdy enough to stand up to long hours of testing on an instrument for vibration testing, where the team was able to collect valuable feedback and data. This kept the team’s spirit and motivation high and also helped them streamline their workflows, saving time and money.

A design that is fully embedded process

In the present, Quad Lock’s production facility is responsible for products distributed to millions of customers across the world. The technology of additive manufacturing is now integrated into Quad Lock’s design, prototyping and production procedures.

This will greatly benefit the company as it expands its range of products, with mounting solutions for cars, runners , and interior walls of houses and office buildings.

Leave a Reply

Your email address will not be published.